|
|
| Name | ID | Default? | Description | Status | Type | Modified | Mod. by | Total Payloads | Distinct Payloads |
|---|---|---|---|---|---|---|---|---|---|
| user_bilkat_misalignment_prompt2proc_run2_without_pxd | 3633 | ✘ | Standard misalignment ala proc2prompt we used since proc12 = derived as difference of prompt stage and stage1 in current prompt calibration. For data with PXD2 offline = starting with exp32. This was derived using exp32 |
TESTING | DEV | 02/19/2025 3:42 p.m. | bilkat | 2 | 2 |
| user_bilkat_misalignment_prompt2proc_run2_with_pxd | 3632 | ✘ | Standard misalignment ala proc2prompt we used since proc12 = derived as difference of prompt stage and stage1 in current prompt calibration. For data with PXD2 online = up to end of exp31. This was derived using exp30, which might have more PXD ladder active. |
TESTING | DEV | 02/19/2025 3:41 p.m. | bilkat | 2 | 2 |
| user_bilkat_alignment_bucket47 | 3620 | ✘ | Airflow result for bucket42 |
TESTING | DEV | 02/09/2025 11:32 a.m. | bilkat | 234 | 6 |
| user_bilkat_alignment_exp31exp32 | 3546 | ✘ | separate alignment of e31 and e32 - fix of bucket 39 |
TESTING | DEV | 01/09/2025 2:19 p.m. | bilkat | 144 | 6 |
| user_bilkat_alignment_bucket39 | 3477 | ✘ | Bucket39 - part with PXD, part with SVD-only - done at KEKCC |
TESTING | DEV | 10/09/2024 11:52 a.m. | bilkat | 144 | 6 |
| user_bilkat_alignment_bucket38 | 3442 | ✘ | Alignment for prompt bucket38 - done at KEKCC manually |
TESTING | DEV | 08/23/2024 9:18 a.m. | bilkat | 222 | 6 |
| user_bilkat_alignment_proc16_chunk4 | 3438 | ✘ | Chunk 4 - buckets 30 and 31 realigned to fix z-refence issue. Rest of buckets not included in recalibration - should be taken from the baseline prompt |
TESTING | DEV | 08/21/2024 12:59 p.m. | bilkat | 354 | 6 |
| user_bilkat_alignment_b37_prompt_it3 | 3432 | ✘ | Last iteration (3) of prompt alignment stage for bucket37 - to be used as baseline for bucket 38 - to avoid issues with moving CDC z-reference until we fix the constraints. |
TESTING | DEV | 08/08/2024 11:15 a.m. | bilkat | 6 | 6 |
| user_bilkat_alignment_proc16_chunk3 | 3394 | ✘ | Alignment for proc16, chunk3, buckets 26 to 29, stage 2, after fixing the z-reference issue, done at KEKCC manually, to got to Airflow |
TESTING | DEV | 07/09/2024 11:25 p.m. | bilkat | 870 | 6 |
| user_bilkat_alignment_proc13_bucket29_prompt_stage_it2 | 3392 | ✘ | proc13, stage prompt, it2 - as baseline for previous problematic bucket |
TESTING | DEV | 07/08/2024 7:50 a.m. | bilkat | 2 | 2 |
| user_bilkat_alignment_bucket37_kekcc_as_baseline | 3360 | ✘ | Alignment from end of bucket37 extended to infinity (and to start of b37) - to be used as testing baseline for next prompt (b38) |
TESTING | DEV | 06/23/2024 3:37 p.m. | bilkat | 2 | 2 |
| user_bilkat_alignment_bucket37_kekcc | 3332 | ✘ | Alignment for bucket37 derived at KEKCC instead of BNL due to strange issues at BNL |
TESTING | DEV | 06/06/2024 12:58 p.m. | bilkat | 192 | 6 |
| user_bilkat_testVXDBowingEvery10s | 3247 | ✘ | Special-named payload containing extracted residual changes upsampled to 10s |
TESTING | DEV | 03/29/2024 5:01 p.m. | bilkat | 15 | 8 |
| user_bilkat_testalignment_e30r2276to2343 | 3244 | ✘ | testing for timedep - first constant prompt stage |
TESTING | DEV | 03/25/2024 11:41 p.m. | bilkat | 6 | 6 |
| user_bilkat_alignment_exp30_v1 | 3217 | ✘ | First preliminary alignment from collision data (and cosmics during collisions) using runs 1243 and 1246, iteration 1 |
TESTING | DEV | 02/26/2024 1:02 p.m. | bilkat | 6 | 6 |
| user_bilkat_testWrongMagneticField_nominalAlignedWithJpsiTight | 3210 | ✘ | As user_bilkat_testWrongMagneticField_nominalAligned. but using very tight width for júpsi mass in alignment |
TESTING | DEV | 02/19/2024 1:21 p.m. | bilkat | 6 | 6 |
| user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned_noWires_IPfree | 3206 | ✘ | Same as user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned but with fixed wires and floating IP |
TESTING | DEV | 02/16/2024 1:57 p.m. | bilkat | 6 | 6 |
| user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned_noWires_IPfixed | 3205 | ✘ | Same as user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned but with fixed wires (and IP) |
TESTING | DEV | 02/16/2024 1:57 p.m. | bilkat | 6 | 6 |
| user_bilkat_testWrongMagneticFieldAlignReco_nominalAlignedWithJpsi | 3204 | ✘ | Same as user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned, but also mass-constrained J/psi used for alignment - 50k B0 -> J/psi KS |
TESTING | DEV | 02/16/2024 1:57 p.m. | bilkat | 6 | 6 |
| user_bilkat_testWrongMagneticFieldAlignReco_1.5TAligned | 3201 | ✘ | Investigations of charge-momentum asymmetry. Default MC simulation with (wrong) 1.5T constant field used for reco and alignment. |
TESTING | DEV | 02/15/2024 1:02 p.m. | bilkat | 6 | 6 |
| user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned | 3200 | ✘ | Investigations of charge-momentum asymmetry. Default nominal MC alignment with correct B field |
TESTING | DEV | 02/15/2024 1 p.m. | bilkat | 6 | 6 |
| user_bilkat_misalignment_CDCbyCarsten_v1 | 3190 | ✘ | same as user_bilkat_misalignment_CDCbyCarsten, but misalignment scale times 10 |
TESTING | DEV | 02/09/2024 4:39 p.m. | bilkat | 1 | 1 |
| user_bilkat_misalignment_CDCbyCarsten | 3189 | ✘ | Testing misalignment where only y for each layer is misaligned as follows: y = (layer * (layer - 55)) / 28**2 * 0.002 |
TESTING | DEV | 02/09/2024 2:52 p.m. | bilkat | 1 | 1 |
| user_bilkat_alignment_exp29_average | 3160 | ✘ | Average alignment from runs 7 to 1508, using average from exp28 as starting point, CDC not realigned (yet here) |
TESTING | DEV | 01/11/2024 3:03 p.m. | bilkat | 6 | 6 |
| user_bilkat_alignment_prompt2proc_scale_0.5 | 3142 | ✘ | This is a rescaled alignment_misalignment_prompt_to_proc12stage1_v4 misalignment (VXD sensors only) by factor 0.5 |
TESTING | DEV | 12/14/2023 1:53 p.m. | bilkat | 2 | 2 |