|
Name | ID | Default? | Description | Status | Type | Modified | Mod. by | Total Payloads | Distinct Payloads |
---|---|---|---|---|---|---|---|---|---|
alignment_test_2019c_from4937 | 868 | ✘ | Based on alignment_2019c_v4, realigned VXD hs+sensor-by-sensor(L6 fixed) + IP, IoV extended to whole exp10 |
TESTING | DEV | 02/02/2020 3:41 a.m. | bilkat | 3 | 3 |
alignment_patch_BKLMDisplacement_from_master_2019-11-29 | 848 | ✘ | Only BKLMDisplacement payload missing for processing of real exp10 data with master |
TESTING | DEV | 01/27/2020 2:55 p.m. | bilkat | 7 | 7 |
alignmentMC_BFieldOffExp1003Run1 | 845 | ✘ | GT for alignment MC studies with Magnet OFF in exp1003 run 1 (run 0 and other with Magnet ON |
TESTING | DEV | 12/23/2019 11:43 a.m. | bilkat | 1 | 1 |
alignment_BFieldOffExp1003Run1 | 844 | ✘ | GT for alignment MC studies with Magnet OFF in exp1003 run 1 (run 0 and other with Magnet ON |
OPEN | DEV | 12/23/2019 11:33 a.m. | bilkat | 2 | 1 |
alignment_2019c_v1 | 763 | ✘ | First attempt to align exp10 VXD + CDC layers + IP. Using Bon cosmics 3431,3432 + physics 3398 (all exp10) |
TESTING | DEV | 11/04/2019 9:03 a.m. | bilkat | 0 | 0 |
alignment_proc10_baselineOct28 | 755 | ✘ | New baseline alignment for proc10 using Bon+physics data after quench |
TESTING | DEV | 10/28/2019 11:41 a.m. | bilkat | 3 | 3 |
alignment_cdcwirestest062019 | 753 | ✘ | CDC wire-by-wire alignment |
TESTING | DEV | 10/23/2019 4:35 p.m. | bilkat | 1 | 1 |
alignment_stage2_proc10 | 752 | ✘ | Time-dependent global alignment of VXD+CDC+BeamSpot with single physics run E7R349, IoV extended backwards and forwards (real data boundaries: E7R2206-E8R349) |
TESTING | DEV | 10/22/2019 1:49 p.m. | bilkat | 6 | 3 |
bilka_proc10_VXDCDCT0_i0_v1 | 723 | ✘ | First iteration for VXD+CDC+T0 |
TESTING | DEV | 09/30/2019 6:08 p.m. | bilkat | 30 | 9 |
alignment_reset_VXDCDC | 721 | ✘ | This GT contains VXD alignment with all zeros and CDC alignment with zeros for layers and wire x, y ends. The z-positions of the wires are inherited from older payloads where CDC group stored some survey measurements for this. The main purpose of this is to start with alignment from scratch (zeros). |
TESTING | DEV | 09/28/2019 2:53 p.m. | bilkat | 2 | 2 |
bilka_CDCCalibrationsB0exp8_rel4_patch | 703 | ✘ | Tag with fixed CDC calibrations for exp 8 B0 data - from run 3463 |
TESTING | DEV | 09/12/2019 2:12 p.m. | bilkat | 4 | 4 |
beamtest_vxd_april2017_rev1 | 270 | ✘ | VXD beam test 2017 - alignment |
OPEN | DEV | 06/27/2017 12:26 p.m. | bilkat | 22 | 7 |
test_CDCLayerAlignment_in_caf | 253 | ✘ | Test misaligned global tag for CDCLayerAlignment |
OPEN | DEV | 04/29/2017 4:11 p.m. | bilkat | 1 | 1 |