Questions? Write to T1 CDB team

GlobalTag: 76 items found         Click on items for more details


Name ID Default? Description Status Type Modified Mod. by Total Payloads Distinct Payloads
user_bilkat_alignment_exp28_average 3070
Average alignment over all configurations from run 39 to run 164
TESTING DEV 10/02/2023 9:20 p.m. bilkat 6 6
user_bilkat_alignment_exp28_v1 3063
VXD+CDC alignment from B=0T cosmic data - preliminary, iteration 2
TESTING DEV 09/23/2023 10:34 p.m. bilkat 4 4
user_bilkat_alignment_exp28_v2 3069
Alignment for exp28 with all PXD sensors ON, CO2 temp=-30deg
TESTING DEV 09/27/2023 4:43 p.m. bilkat 6 6
user_bilkat_alignment_exp29_average 3160
Average alignment from runs 7 to 1508, using average from exp28 as starting point, CDC not realigned (yet here)
TESTING DEV 01/11/2024 3:03 p.m. bilkat 6 6
user_bilkat_alignment_exp30_v1 3217
First preliminary alignment from collision data (and cosmics during collisions) using runs 1243 and 1246, iteration 1
TESTING DEV 02/26/2024 1:02 p.m. bilkat 6 6
user_bilkat_alignment_exp31exp32 3546
separate alignment of e31 and e32 - fix of bucket 39
TESTING DEV 01/09/2025 2:19 p.m. bilkat 144 6
user_bilkat_alignment_magnet_off 3053
Magnetic field turned off (0T)
TESTING DEV 09/18/2023 3:19 p.m. bilkat 1 1
user_bilkat_alignment_proc13_bucket29_prompt_stage_it2 3392
proc13, stage prompt, it2 - as baseline for previous problematic bucket
TESTING DEV 07/08/2024 7:50 a.m. bilkat 2 2
user_bilkat_alignment_proc16_chunk3 3394
Alignment for proc16, chunk3, buckets 26 to 29, stage 2, after fixing the z-reference issue, done at KEKCC manually, to got to Airflow
TESTING DEV 07/09/2024 11:25 p.m. bilkat 870 6
user_bilkat_alignment_proc16_chunk4 3438
Chunk 4 - buckets 30 and 31 realigned to fix z-refence issue. Rest of buckets not included in recalibration - should be taken from the baseline prompt
TESTING DEV 08/21/2024 12:59 p.m. bilkat 354 6
user_bilkat_alignment_prompt2proc_scale_0.3 3141
This is a rescaled alignment_misalignment_prompt_to_proc12stage1_v4 misalignment (VXD sensors only) by factor 0.3
TESTING DEV 12/14/2023 1:53 p.m. bilkat 2 2
user_bilkat_alignment_prompt2proc_scale_0.5 3142
This is a rescaled alignment_misalignment_prompt_to_proc12stage1_v4 misalignment (VXD sensors only) by factor 0.5
TESTING DEV 12/14/2023 1:53 p.m. bilkat 2 2
user_bilkat_alignment_pxd_mask_v1 3064
PXD masking from Maiko from runs up to 45, exp 28
TESTING DEV 09/24/2023 8:19 p.m. bilkat 33 3
user_bilkat_fakePhotonEnergyBiasCorrection_extended 3706
special workaround GT to extend the photon energy bias correction PhotonEnergyBiasCorrection_MC15ri_Nov2022 from exp26 to infinity, so we can use it for run2 data before full calibartion is available
TESTING DEV 06/24/2025 12:28 p.m. bilkat 3 3
user_bilkat_misalignment_CDCbyCarsten 3189
Testing misalignment where only y for each layer is misaligned as follows: y = (layer * (layer - 55)) / 28**2 * 0.002
TESTING DEV 02/09/2024 2:52 p.m. bilkat 1 1
user_bilkat_misalignment_CDCbyCarsten_v1 3190
same as user_bilkat_misalignment_CDCbyCarsten, but misalignment scale times 10
TESTING DEV 02/09/2024 4:39 p.m. bilkat 1 1
user_bilkat_misalignment_prompt2proc_run2_without_pxd 3633
Standard misalignment ala proc2prompt we used since proc12 = derived as difference of prompt stage and stage1 in current prompt calibration. For data with PXD2 offline = starting with exp32. This was derived using exp32
TESTING DEV 02/19/2025 3:42 p.m. bilkat 2 2
user_bilkat_misalignment_prompt2proc_run2_with_pxd 3632
Standard misalignment ala proc2prompt we used since proc12 = derived as difference of prompt stage and stage1 in current prompt calibration. For data with PXD2 online = up to end of exp31. This was derived using exp30, which might have more PXD ladder active.
TESTING DEV 02/19/2025 3:41 p.m. bilkat 2 2
user_bilkat_testalignment_e30r2276to2343 3244
testing for timedep - first constant prompt stage
TESTING DEV 03/25/2024 11:41 p.m. bilkat 6 6
user_bilkat_testVXDBowingEvery10s 3247
Special-named payload containing extracted residual changes upsampled to 10s
TESTING DEV 03/29/2024 5:01 p.m. bilkat 15 8
user_bilkat_testWrongMagneticFieldAlignReco_1.5TAligned 3201
Investigations of charge-momentum asymmetry. Default MC simulation with (wrong) 1.5T constant field used for reco and alignment.
TESTING DEV 02/15/2024 1:02 p.m. bilkat 6 6
user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned 3200
Investigations of charge-momentum asymmetry. Default nominal MC alignment with correct B field
TESTING DEV 02/15/2024 1 p.m. bilkat 6 6
user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned_noWires_IPfixed 3205
Same as user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned but with fixed wires (and IP)
TESTING DEV 02/16/2024 1:57 p.m. bilkat 6 6
user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned_noWires_IPfree 3206
Same as user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned but with fixed wires and floating IP
TESTING DEV 02/16/2024 1:57 p.m. bilkat 6 6
user_bilkat_testWrongMagneticFieldAlignReco_nominalAlignedWithJpsi 3204
Same as user_bilkat_testWrongMagneticFieldAlignReco_nominalAligned, but also mass-constrained J/psi used for alignment - 50k B0 -> J/psi KS
TESTING DEV 02/16/2024 1:57 p.m. bilkat 6 6