|
Name | ID | Default? | Description | Status | Type | Modified | Mod. by | Total Payloads | Distinct Payloads |
---|---|---|---|---|---|---|---|---|---|
alignment_proc12stage1_part14_sag2 | 1801 | ✘ | proc12 part14 stage1 with wire sagging - v2, sag up t L20 |
TESTING | DEV | 06/20/2021 1:20 a.m. | bilkat | 2 | 2 |
alignment_proc13_chunk5 | 2641 | ✘ | Merged results of the reprocessings of the 7 individual buckets of chunk5. For bucket 20, about half of hadron events (total 2.8M instead of 3.8M entries) was used to workaround a crash in Millepede II (effect negligible). |
TESTING | DEV | 08/14/2022 3:33 p.m. | bilkat | 1512 | 6 |
alignment_reset_MC | 2810 | ✘ | Reset alignment payloads for VXD and CDC to exactly zeros for default ideal MC simulation |
TESTING | DEV | 12/14/2022 12:42 p.m. | bilkat | 2 | 2 |
alignment_reset_VXDCDC | 721 | ✘ | This GT contains VXD alignment with all zeros and CDC alignment with zeros for layers and wire x, y ends. The z-positions of the wires are inherited from older payloads where CDC group stored some survey measurements for this. The main purpose of this is to start with alignment from scratch (zeros). |
TESTING | DEV | 09/28/2019 2:53 p.m. | bilkat | 2 | 2 |
alignment_s-proc2_test1_stage1 | 1968 | ✘ | Test of s-proc2 realignment for bucket25 - stage1 |
TESTING | DEV | 08/27/2021 9:06 a.m. | bilkat | 6 | 6 |
alignment_s-proc2_test1_stage2 | 1969 | ✘ | Realigned bucket25 as test for s-proc2 - stage2 |
TESTING | DEV | 08/27/2021 12:50 p.m. | bilkat | 240 | 6 |
alignment_s-proc2_test2_stage2 | 1970 | ✘ | Bucket25 test for s-proc2 stage2 full baseline 1M per block |
TESTING | DEV | 08/27/2021 2 p.m. | bilkat | 24 | 6 |
alignment_s-proc2_test3_stage2 | 1971 | ✘ | Bucket25 realigned for s-proc2 test -stage 2 with SVD ladders free |
TESTING | DEV | 08/27/2021 4:14 p.m. | bilkat | 198 | 6 |
alignment_s-proc4_bucket36ECL | 2869 | ✘ | Alignment from bucket36 + ECL payloads fix |
OPEN | DEV | 01/27/2023 11:30 p.m. | bilkat | 187 | 7 |
alignment_stage2_proc10 | 752 | ✘ | Time-dependent global alignment of VXD+CDC+BeamSpot with single physics run E7R349, IoV extended backwards and forwards (real data boundaries: E7R2206-E8R349) |
TESTING | DEV | 10/22/2019 1:49 p.m. | bilkat | 6 | 3 |
alignment_test_2019c_from4937 | 868 | ✘ | Based on alignment_2019c_v4, realigned VXD hs+sensor-by-sensor(L6 fixed) + IP, IoV extended to whole exp10 |
TESTING | DEV | 02/02/2020 3:41 a.m. | bilkat | 3 | 3 |
alignment_test_b36_const | 2878 | ✘ | bucket36, first block - then constant till end. For testing of future optimized timedep |
TESTING | DEV | 02/04/2023 9:12 p.m. | bilkat | 3 | 3 |
beamtest_vxd_april2017_rev1 | 270 | ✘ | VXD beam test 2017 - alignment |
OPEN | DEV | 06/27/2017 12:26 p.m. | bilkat | 22 | 7 |
bilka_CDCCalibrationsB0exp8_rel4_patch | 703 | ✘ | Tag with fixed CDC calibrations for exp 8 B0 data - from run 3463 |
TESTING | DEV | 09/12/2019 2:12 p.m. | bilkat | 4 | 4 |
bilka_proc10_VXDCDCT0_i0_v1 | 723 | ✘ | First iteration for VXD+CDC+T0 |
TESTING | DEV | 09/30/2019 6:08 p.m. | bilkat | 30 | 9 |
staging_online_bilkat_20201030-181233 | 1386 | ✘ | CR DQM histograms with residuals bad for exp14 -> realignment needed |
OPEN | DEV | 10/30/2020 6:13 p.m. | bilkat | 2 | 2 |
staging_online_bilkat_20211021-152505 | 2080 | ✘ | needed for reasonable online performance |
OPEN | DEV | 10/21/2021 3:26 p.m. | bilkat | 2 | 2 |
test_CDCLayerAlignment_in_caf | 253 | ✘ | Test misaligned global tag for CDCLayerAlignment |
OPEN | DEV | 04/29/2017 4:11 p.m. | bilkat | 1 | 1 |
user_bilkat_alignment_b37_prompt_it3 | 3432 | ✘ | Last iteration (3) of prompt alignment stage for bucket37 - to be used as baseline for bucket 38 - to avoid issues with moving CDC z-reference until we fix the constraints. |
TESTING | DEV | 08/08/2024 11:15 a.m. | bilkat | 6 | 6 |
user_bilkat_alignment_bucket37_kekcc | 3332 | ✘ | Alignment for bucket37 derived at KEKCC instead of BNL due to strange issues at BNL |
TESTING | DEV | 06/06/2024 12:58 p.m. | bilkat | 192 | 6 |
user_bilkat_alignment_bucket37_kekcc_as_baseline | 3360 | ✘ | Alignment from end of bucket37 extended to infinity (and to start of b37) - to be used as testing baseline for next prompt (b38) |
TESTING | DEV | 06/23/2024 3:37 p.m. | bilkat | 2 | 2 |
user_bilkat_alignment_bucket38 | 3442 | ✘ | Alignment for prompt bucket38 - done at KEKCC manually |
TESTING | DEV | 08/23/2024 9:18 a.m. | bilkat | 222 | 6 |
user_bilkat_alignment_bucket39 | 3477 | ✘ | Bucket39 - part with PXD, part with SVD-only - done at KEKCC |
TESTING | DEV | 10/09/2024 11:52 a.m. | bilkat | 144 | 6 |
user_bilkat_alignment_bucket47 | 3620 | ✘ | Airflow result for bucket42 |
TESTING | DEV | 02/09/2025 11:32 a.m. | bilkat | 234 | 6 |
user_bilkat_alignment_exp28_all | 3131 | ✘ | Alignment for all different periods (some PXD sensors ON/OFF, different temperature of CO2 cooling) of exp28. |
TESTING | DEV | 12/07/2023 5:08 p.m. | bilkat | 37 | 6 |