|
|
| Name | ID | Default? | Description | Status | Type | Modified | Mod. by | Total Payloads | Distinct Payloads |
|---|---|---|---|---|---|---|---|---|---|
| alignment_bucket35 | 2584 | ✘ | Airflow bucket35 |
TESTING | DEV | 07/06/2022 7:38 a.m. | tadeas | 300 | 6 |
| alignment_proc13_chunk4_v2 | 2577 | ✘ | alignment for b17 and b18 done separately on Airflow and manually merged - fixed |
TESTING | DEV | 06/30/2022 4:08 p.m. | tadeas | 486 | 6 |
| alignment_proc13_chunk4 | 2576 | ✘ | alignment for b17 and b18 done separately on Airflow and manually merged |
OPEN | DEV | 06/30/2022 3:41 p.m. | tadeas | 480 | 6 |
| alignment_bucket34 | 2542 | ✘ | Alignment for bucket34 |
TESTING | DEV | 06/22/2022 3:37 p.m. | tadeas | 252 | 6 |
| alignment_VXDCDCalignment_prompt_bucket33 | 2539 | ✘ | Prompt stage of bucket33 extended to infinity |
TESTING | DEV | 06/21/2022 7:49 a.m. | tadeas | 6 | 6 |
| alignment_bucket33 | 2504 | ✘ | Airflow result for bucket33 - extended to start with run 1917 instead 1996? |
TESTING | DEV | 06/09/2022 8:30 a.m. | tadeas | 240 | 6 |
| alignment_proc13_chunk3 | 2494 | ✘ | proc13 chunk3 manually merged bucket16 and 16b done separately |
TESTING | DEV | 06/05/2022 8:16 p.m. | tadeas | 366 | 6 |
| alignment_bucket32 | 2431 | ✘ | Airflow result for bucket32 - this time starting from resetted alignment to remove accumulated z-offset due to alignment z-reference issue |
TESTING | DEV | 05/10/2022 2:57 p.m. | tadeas | 228 | 6 |
| alignment_baseline_prompt_reset | 2425 | ✘ | Baseline suitable for any current prompt alignment start with wires reset to zero - to have exact same alignment reference at the start of each bucket |
TESTING | DEV | 05/01/2022 11:37 a.m. | tadeas | 2 | 2 |
| alignment_VXDCDC_baseline_prompt | 2424 | ✘ | Baseline alignment suitable for starting any current prompt alignment on Airflow |
TESTING | DEV | 05/01/2022 11:26 a.m. | tadeas | 2 | 2 |
| alignment_resetCDCwires_adeform_v1 | 2423 | ✘ | Test additional deformation of CDC end-plates 0.015 at F and 0.005 cm at B side |
TESTING | DEV | 04/30/2022 8:11 p.m. | tadeas | 1 | 1 |
| alignment_bucket31 | 2407 | ✘ | Airflow result for bucket31 minus BeamSpot |
OPEN | DEV | 04/17/2022 8:21 a.m. | tadeas | 180 | 6 |
| alignment_bucket29 | 2245 | ✘ | Airflow alignment for bucket29 |
OPEN | DEV | 01/12/2022 10:51 a.m. | tadeas | 70 | 2 |
| alignment_bucket28 | 2210 | ✘ | Airflow alignment of bucket28 |
OPEN | DEV | 12/27/2021 9:51 a.m. | tadeas | 62 | 2 |
| alignment_misalignment_Twist_50um | 2184 | ✘ | Weak mode twist misalignment 50um, respecting constraints of type 2 |
TESTING | DEV | 12/16/2021 11:34 a.m. | tadeas | 1 | 1 |
| alignment_bucket27_prompt | 2176 | ✘ | Official bucket27 alignment for Airflow upload |
OPEN | DEV | 12/11/2021 10:55 a.m. | tadeas | 72 | 2 |
| alignment_bucket26 | 2129 | ✘ | Airflow tag from full alignment cleaned up |
OPEN | DEV | 11/21/2021 12:20 a.m. | tadeas | 48 | 2 |
| alignment_testfix_bucket19 | 2115 | ✘ | Test of fix for alignment problem reported in #BIIPERF-175 - the payloads for bucket 18 are taken to be used for bucket19 with issues. |
TESTING | DEV | 11/16/2021 12:35 p.m. | tadeas | 2 | 2 |
| alignment_s-proc2_naf | 1992 | ✘ | VXD+CDC alignment ala reprocessing derived for s-proc2 at NAF |
TESTING | DEV | 09/12/2021 9:01 a.m. | tadeas | 80 | 2 |
| alignment_s-proc2_resetWires | 1965 | ✘ | CDCAlignment from data_reprocessing_prompt bucet24 with wire alignment reset to zeros - to be used as starting point for CDCAlignment for bucket25 in s-proc2 |
TESTING | DEV | 08/26/2021 12:59 p.m. | tadeas | 1 | 1 |
| alignment_bucket25prompt_resetWires | 1964 | ✘ | CDCAlignment from data_reprocessing_prompt bucet25 with wire alignment reset to zeros |
TESTING | DEV | 08/26/2021 12:58 p.m. | tadeas | 1 | 1 |
| alignment_proc12stage1_part14_R53 | 1850 | ✘ | Proc12 stage1 for part14, only L53 radius |
TESTING | DEV | 06/24/2021 11:49 a.m. | tadeas | 2 | 2 |
| alignment_proc12stage1_part14_R52H53 | 1844 | ✘ | Proc12 stage1 for part14 ... radi at L52, hemi at L53 |
TESTING | DEV | 06/23/2021 7 a.m. | tadeas | 2 | 2 |
| alignment_proc12stage1_part14_default | 1816 | ✘ | Proc12 stage1 for part14 default retry |
TESTING | DEV | 06/22/2021 11:05 a.m. | tadeas | 2 | 2 |
| alignment_proc12stage1_part14_L52hemi | 1809 | ✘ | Proc12 stage1 of part14 using L52 for hemisphere constraints |
TESTING | DEV | 06/22/2021 7:35 a.m. | tadeas | 2 | 2 |