|
|
| Name | ID | Default? | Description | Status | Type | Modified | Mod. by | Total Payloads | Distinct Payloads |
|---|---|---|---|---|---|---|---|---|---|
| alignment_bucket29 | 2245 | ✘ | Airflow alignment for bucket29 |
OPEN | DEV | 01/12/2022 10:51 a.m. | tadeas | 70 | 2 |
| alignment_bucket28 | 2210 | ✘ | Airflow alignment of bucket28 |
OPEN | DEV | 12/27/2021 9:51 a.m. | tadeas | 62 | 2 |
| alignment_bucket35 | 2584 | ✘ | Airflow bucket35 |
TESTING | DEV | 07/06/2022 7:38 a.m. | tadeas | 300 | 6 |
| alignment_bucket31 | 2407 | ✘ | Airflow result for bucket31 minus BeamSpot |
OPEN | DEV | 04/17/2022 8:21 a.m. | tadeas | 180 | 6 |
| alignment_bucket32 | 2431 | ✘ | Airflow result for bucket32 - this time starting from resetted alignment to remove accumulated z-offset due to alignment z-reference issue |
TESTING | DEV | 05/10/2022 2:57 p.m. | tadeas | 228 | 6 |
| alignment_bucket33 | 2504 | ✘ | Airflow result for bucket33 - extended to start with run 1917 instead 1996? |
TESTING | DEV | 06/09/2022 8:30 a.m. | tadeas | 240 | 6 |
| alignment_bucket26 | 2129 | ✘ | Airflow tag from full alignment cleaned up |
OPEN | DEV | 11/21/2021 12:20 a.m. | tadeas | 48 | 2 |
| alignment_proc13_chunk4 | 2576 | ✘ | alignment for b17 and b18 done separately on Airflow and manually merged |
OPEN | DEV | 06/30/2022 3:41 p.m. | tadeas | 480 | 6 |
| alignment_proc13_chunk4_v2 | 2577 | ✘ | alignment for b17 and b18 done separately on Airflow and manually merged - fixed |
TESTING | DEV | 06/30/2022 4:08 p.m. | tadeas | 486 | 6 |
| alignment_bucket34 | 2542 | ✘ | Alignment for bucket34 |
TESTING | DEV | 06/22/2022 3:37 p.m. | tadeas | 252 | 6 |
| alignment_test_proc12chunk2part14_withL3 | 1739 | ✘ | Alternative alignment for part14 of chunk2 with L3 sensors run dependent |
TESTING | DEV | 06/02/2021 12:01 p.m. | tadeas | 498 | 6 |
| alignment_VXDCDC_baseline_prompt | 2424 | ✘ | Baseline alignment suitable for starting any current prompt alignment on Airflow |
TESTING | DEV | 05/01/2022 11:26 a.m. | tadeas | 2 | 2 |
| alignment_baseline_prompt_reset | 2425 | ✘ | Baseline suitable for any current prompt alignment start with wires reset to zero - to have exact same alignment reference at the start of each bucket |
TESTING | DEV | 05/01/2022 11:37 a.m. | tadeas | 2 | 2 |
| alignment_CHEP2021_bucket15_Aligned2Best | 1517 | ✘ | Best full alignment on data - for public plot for CHEP2021 - comfiguration for proc12 |
TESTING | DEV | 02/07/2021 9:36 p.m. | tadeas | 3 | 3 |
| alignment_resetBucket13wireAlignment | 1233 | ✘ | Bucket13 CDC alignment with wires (xb,yb,xf,yf) set to 0. |
TESTING | DEV | 07/19/2020 1:21 p.m. | tadeas | 1 | 1 |
| alignment_s-proc2_resetWires | 1965 | ✘ | CDCAlignment from data_reprocessing_prompt bucet24 with wire alignment reset to zeros - to be used as starting point for CDCAlignment for bucket25 in s-proc2 |
TESTING | DEV | 08/26/2021 12:59 p.m. | tadeas | 1 | 1 |
| alignment_bucket25prompt_resetWires | 1964 | ✘ | CDCAlignment from data_reprocessing_prompt bucet25 with wire alignment reset to zeros |
TESTING | DEV | 08/26/2021 12:58 p.m. | tadeas | 1 | 1 |
| alignment_resetCDCwires_bucket14 | 1370 | ✘ | Copy CDCAlignment revision 119 (bucket14) with wire alignment(xb,yb,xf,yf) set to zero |
TESTING | DEV | 10/21/2020 3:11 p.m. | tadeas | 1 | 1 |
| alignment_misalignment_prompt_to_proc12stage1 | 1742 | ✘ | Corrections from prompt to stage1 in proc12 for part14 - a model of the prompt misalignment |
TESTING | DEV | 06/03/2021 6:53 p.m. | tadeas | 0 | 0 |
| alignment_misalignment_prompt_to_proc12stage1_v2 | 1744 | ✘ | Corrections from prompt to stage1 in proc12 for part14 - a model of the prompt misalignment. v1 - with wires reset to zero |
TESTING | DEV | 06/03/2021 9:26 p.m. | tadeas | 2 | 2 |
| alignment_misalignment_prompt_to_proc12stage1_v3 | 1745 | ✘ | Corrections from prompt to stage1 in proc12 for part14 - a model of the prompt misalignment. v1 - with wires reset to zero; ladders reset to zero |
TESTING | DEV | 06/03/2021 11:30 p.m. | tadeas | 2 | 2 |
| alignment_misalignment_prompt_to_proc12stage1_v1 | 1743 | ✘ | Corrections from prompt to stage1 in proc12 for part14 - a model of the prompt misalignment. v1 - with wire z-positions set to zero |
TESTING | DEV | 06/03/2021 7:59 p.m. | tadeas | 2 | 2 |
| alignment_misalignment_prompt_to_proc12stage1_v4 | 1746 | ✘ | Corrections from prompt to stage1 in proc12 for part14 - a model of the prompt misalignment. v4 wire difference between prompt and proc12, ladders zero, signs should be correct |
TESTING | DEV | 06/04/2021 2:57 p.m. | tadeas | 2 | 2 |
| alignment_misalignment_prompt_to_proc12stage1_v4_test1 | 1747 | ✘ | Corrections from prompt to stage1 in proc12 for part14 - a model of the prompt misalignment. v4 wire difference between prompt and proc12, ladders zero, signs should be correct. Added z-pos mislaignment for conical part |
TESTING | DEV | 06/04/2021 9:47 p.m. | tadeas | 2 | 2 |
| alignment_resetBucket15CDCwireAlignment | 1483 | ✘ | data_reprocessing_prompt with wires reset to nominal values (zeros) |
TESTING | DEV | 01/16/2021 5:56 p.m. | tadeas | 1 | 1 |