|
|
| Name | ID | Default? | Description | Status | Type | Modified | Mod. by | Total Payloads | Distinct Payloads |
|---|---|---|---|---|---|---|---|---|---|
| rebase_CDCdEdx_bucket16 | 1459 | ✘ | test GT for s-proc1 related cdc dedx payloads |
TESTING | DEV | 12/13/2020 4:56 a.m. | jikumar | 5 | 5 |
| VTX-CMOS-testbeam-magnetOFF_2020-12-12 | 1458 | ✘ | Development GT for VTX CMOS testbeam with TJ Monopix 1 in March 2020. MagnetOFF |
TESTING | DEV | 12/12/2020 8:03 p.m. | benni | 3 | 2 |
| mc_production_MC14rd | 1457 | ✘ | GT for run-dependent MC14b corresponding to prompt processing |
TESTING | RELEASE | 08/23/2021 8:03 a.m. | martini | 81 | 43 |
| svd_MaskedStripsForSimulation_20201210 | 1456 | ✘ | GT for early phase 3 simulation containing the list of masked strips at FADC level applied from exp14. This is used only for the self-produced MC for SVD resolution study |
TESTING | DEV | 12/23/2020 3:10 p.m. | zani | 1 | 1 |
| cdc_bucket16_local_v1 | 1455 | ✘ | cdc local constatns for bucket16 |
VALIDATED | DEV | 12/09/2020 8:50 a.m. | uchida | 3 | 1 |
| release-05-01-09 | 1454 | ✔ | Software Development and Testing Tag
This global tag containing necessary payloads for testing of the software and
experiment independent MC. It cannot be used to analyze data and only contains
payloads for the following intervals of validity:
- exp 0: nominal Belle II Configuration with full PXD (full phase 3)
- exp 1002: Phase 2 Configuration with minimal vertexing detectors and
additional background detectors
- exp 1003: Belle II Configuration with partial PXD (early phase 3)
Previous global tag: release-05-01-03
Changes are collected in Pull request #7670, see https://stash.desy.de/projects/B2/repos/software/pull-requests/7670 |
PUBLISHED | RELEASE | 05/13/2022 7:51 a.m. | tuppr_ware | 391 | 351 |
| staging_online_hearty_20201207-233729 | 1453 | ✘ | ECL geometry after alignment |
OPEN | DEV | 12/07/2020 11:37 p.m. | hearty | 1 | 1 |
| staging_master_hearty_20201207-232615 | 1452 | ✘ | payload with aligned ECL |
OPEN | DEV | 12/07/2020 11:26 p.m. | hearty | 1 | 1 |
| test_dedx | 1451 | ✘ | dedx GT for cdc dEdx |
OPEN | DEV | 12/07/2020 7:49 p.m. | jikumar | 4 | 4 |
| ecl_bucket16 | 1450 | ✘ | ECL local calibrations for bucket16 |
OPEN | DEV | 12/07/2020 7:31 p.m. | czhearty | 0 | 0 |
| beamParametersMC13bPrompt | 1449 | ✘ | Beam parameters, beam spot collision boost and invariant mass for 2019, 2020ab data |
TESTING | RELEASE | 12/07/2020 4:34 p.m. | glazov | 37 | 4 |
| staging_master_jikumar_20201207-161934 | 1448 | ✘ | payloads for MC14 |
OPEN | DEV | 12/07/2020 4:20 p.m. | jikumar | 3 | 3 |
| data_reprocessing_s-proc1_at20201207 | 1447 | ✔ | Final GT for prompt processing of s-proc1, exp/run range (12, 5888, 12, 6427) |
OPEN | RELEASE | 12/07/2020 3:25 p.m. | zani | 42456 | 309 |
| AIRFLOW_online_snapshot_20201207-094707 | 1446 | ✘ | This is the official GT operating online |
TESTING | DEV | 12/07/2020 9:47 a.m. | chunhua | 972 | 436 |
| data_reprocessing_s-proc1 | 1445 | ✔ | Final GT for prompt processing of s-proc1, exp/run range (12, 5888, 12, 6427) |
TESTING | RELEASE | 12/08/2020 8:48 a.m. | zani | 44218 | 309 |
| AIRFLOW_TEST_data_staging_calibration_prompt_recloneAt20201206 | 1444 | ✘ | copy of s-proc1 airflow staging GT (AIRFLOW_TEST_data_staging_calibration_prompt_cloneAt20201201) and just before final dedx had. cal payload merging (4 payloads) |
TESTING | DEV | 12/07/2020 1:28 a.m. | jikumar | 1771 | 40 |
| val_CDCdEdx_sproc1_MC | 1443 | ✘ | s-proc1 MC CDC dEdx |
TESTING | DEV | 12/06/2020 9:05 p.m. | jikumar | 3 | 3 |
| staging_master_depietro_20201204-155128 | 1442 | ✘ | This field is quite useless, in my opinion. :P |
OPEN | DEV | 12/04/2020 3:51 p.m. | depietro | 1 | 1 |
| carlos_test_write9_1201_2020 | 1441 | ✘ | test create tag |
OPEN | DEV | 12/01/2020 8:43 p.m. | carlos | 0 | 0 |
| carlos_test_write8_1201_2020 | 1440 | ✘ | test create tag |
OPEN | DEV | 12/01/2020 8:38 p.m. | carlos | 0 | 0 |
| AIRFLOW_TEST_data_staging_calibration_prompt_cloneAt20201201 | 1439 | ✘ | A test area for development on airflow production. Used as a test staging GT so we don't interfere with the actual production one. |
TESTING | DEV | 12/07/2020 3:14 p.m. | ddossett | 1774 | 44 |
| data_reprocessing_prompt_cloneAt20201201 | 1438 | ✔ | running GT for the first (prompt) reprocessing |
TESTING | RELEASE | 12/01/2020 2:01 p.m. | tamponi | 45182 | 303 |
| test_rel05payloads_bucket16 | 1437 | ✘ | global tag to store all the payloads needed for prompt processing with rel05 of the first runs of exp14 (bucket 16) |
OPEN | DEV | 12/01/2020 1:49 p.m. | zani | 15 | 15 |
| 1436_COPY-OF_data_reprocessing_prompt | 1436 | ✔ | running GT for the first (prompt) reprocessing |
OPEN | RELEASE | 12/01/2020 1:46 p.m. | tamponi | 0 | 0 |
| 1435_COPY-OF_data_reprocessing_prompt | 1435 | ✔ | running GT for the first (prompt) reprocessing |
OPEN | RELEASE | 12/01/2020 1:43 p.m. | tamponi | 0 | 0 |